è vuoto
è vuoto Cavalletto Sollevatore Idraulico per Moto
Caratteristiche
Capacità Carico da 200kg
Il sollevatore idraulico per moto di VEVOR ha una capacità di carico da 200kg, in grado di trasportare la maggior parte delle moto. È compatibile con marchi famosi come Yamaha, Kawasaki, Honda, Suzuki e altri. Questa soluzione efficiente e che fa risparmiare manodopera è ideale per la manutenzione delle moto.
Operazione Semplice
Il cavalletto per bici e moto è dotato di un intervallo di altezza regolabile tra 255-460 mm, che consente di posizionare il supporto al centro del motore della moto e di avvicinarsi ruotando la piattaforma.
Specificazioni
Numero modello articolo: HMSL-440
Capacità max.: 440 libbre / 0,2 tonnellate
Intervallo di altezza: 10 pollici-18 pollici / 255 mm-460 mm
Altezza regolabile: 0-4,7 pollici / 0-120 mm
Dimensioni del prodotto: 12,4 x 11,8 x 12,4 pollici / 315 x 300 x 315 mm
Peso netto: 14,3 libbre / 6,5 kg
Contenuto del Pacco
1 x Cavalletto idraulico per moto
darrin
Recensito in Canada il 22 marzo 2025
Much better than lifting my heavy bike on a stand
François
Recensito in Francia il 3 aprile 2025
Parfait
Alejandro Avila.
Recensito in Messico il 27 maggio 2024
Buena calidad en todos sus materiales, excelente funcionalidad, lo recomiendo!
John A.
Recensito nel Regno Unito il 27 maggio 2024
The base could have done with being wider but it works ok. Ensure you use the safety lock
Scott Frazee
Recensito negli Stati Uniti il 18 marzo 2024
Update 5-21-24: I bought a second dirt bike (2023 Husqvarna FC250). A full motocross bike. The stand also works great with that. I just set the platform higher so it will just get both wheels off the ground. And then set the locking nut underneath it snugly. Works great for this bike too, so I bought a second one.And here is a tip for people: Rather than banging on the arm on the locking nut with a hammer or mallet and risk breaking off the arm.. (You want this positioned snug against the base of where the spindle comes out- to provide more stability). Instead position it so it is snug, and then rotate the platform to get it tight.I have a 21 Honda CRF250F and this stand is perfect for what I need, and at a good price.I also have a regular stand that is 17" high, and trust me, its not that fun flipping a 265 pound bike up on a 17" stand. I can usually do it, but sometime I have to do it a couple times, and then reposition it a bit after.With this stand, I can just position it under my bike and push down on the lever. So much easier!A couple tips for people: Keep the height as low as it can go and still get the bike as high as you need.For my bike, I can leave it on the lowest setting and it can still get the bike high enough for me. If I want the back wheel off the ground (to say lube the chain), I position it more towards the rear, and let the front wheel rest on the ground. No need for me to get both wheels completely off the ground at the same time. That way it stays very stable.I also raised the platform until it just barely fit under my bike, and then it raises both tires a couple inches off the ground. It will sway a little like this if you push on the bike, but it still feels fine to me.If you have a full MX bike with more ground clearance and suspension travel, you will probably need to raise the platform a few inches.. I expect it might feel a little less stable. So I would set the platform only as high as you need it to be to get the job done.Also there is a locking nut on it, so I rotated that in place and then rotated the platform until it was snug. Works for me.I also like the hydraulic thing on it, to make it drop slowly rather than just plopping the bike straight to the ground when you release it... And I don't know if this is how they all ship, but mine had an extra corner pad (for the "feet") and an extra c clip for the pins.I really like the convenience of this stand! Hope this helps someone.
Prodotti consigliati
119.99€
52 .99 € 52.99€
130.99€
54 .99 € 54.99€