Carrello

è vuoto

è vuoto

Kit di riparazione flangia di scarico, staffe di fissaggio per riparazione scatola posteriore marmitta arrugginite per E46 M3

Spedizione gratuita per ordini superiori a 25.99€

43.52€

22 .99 22.99€

Disponibile

Informazioni su questo articolo

  • Modello applicabile: un kit flangia di scarico professionale, appositamente progettato per E46 M3.
  • Materiale di alta qualità: è realizzato in acciaio inossidabile, resistente alle alte temperature e alla ruggine e può essere utilizzato per lungo tempo.
  • Robusto e pratico: consente di risolvere il problema della ruggine o del malfunzionamento del morsetto della flangia di scarico, che può prolungare la durata del veicolo.
  • Facile da installare: sostituisci direttamente quelli vecchi o danneggiati, il nostro kit flangia di alta qualità può essere diviso attorno al tubo di scarico e la flangia può essere sostituita direttamente senza sostituire il gas di scarico.
  • Accessori del prodotto: viene fornito con tutti i componenti richiesti, inclusi due tipi di guarnizioni e tenute e le specifiche corrette di bulloni, rondelle, anelli di bloccaggio e dadi in acciaio inossidabile.



Descrizione prodotto

QC09276-1

aqxreight - Morsetto flangia di scarico, staffe morsetto scatola posteriore silenziatore flangia di scarico per E46 M3

1

QC09276-2

QC09276-3

1

QC09276-2

QC09276-3


Vincent L.
Recensito in Canada il 28 marzo 2025
Worked on my BMW E46 M3. As stated in some reviews, the holes don't line up properly but what you have to do is mix and match them around to ensure they line up before installation. I also had to ream out each hole a little bit to make the bolts go through smoothly. I took one star off as I question if the hardware is truly stainless. I had my own stainless hardware so I didn't use theirs.
Joe
Recensito negli Stati Uniti il 10 marzo 2023
I bought this for my e46 M3 as my stock cast iron flanges had cracked off. I got one set of the flanges on with no issues. The gasket and flanges fit tightly and will definitely make a nice seal. When I went to put on the second set of flanges, I could not push the bolt through the holes. This is when I realized one of the 8 flange clamshells was mis-cast and the hole spacing is not correct. For a part with a 7 day shipping time this is quite the inconvenience. Luckily with Amazon free returns I have ordered a second set with the hopes I can get one good piece to replace my bad one. Just beware the QC on these is not the greatest.
MrJohn613@YouTube
Recensito in Canada il 26 maggio 2022
I used only one or two of these offset to fix rusted hardware but I was impressed with the design. Worked well enough for me and I’d use it again or would recommend for repairs 👍🏽
SBH
Recensito negli Stati Uniti il 6 febbraio 2022
The center pipe-to-catalytic converter flanges on my 2009 Mercedes E350 (W211) were rusted through. This, along with one genuine Mercedes flange and gasket, fixed the problem perfectly.Note that due to being 2-piece flanges, they are not as heavy and substantial as the one-piece genuine Mercedes ones (which you can't use without cutting and welding the pipe anyway). So these will bend a little bit when tightened down, but they still hold great.Great inexpensive fix for this common problem. Saves time and many hundreds of $$ over buying a whole new exhaust or cutting and welding.
Victor
Recensito in Canada il 29 dicembre 2021
the size is too big